Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
Features:
Specs:
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks.
Average Customer Rating: 4.7 out of 5 stars (660 Customer Reviews)
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.
Didn’t last 3 months the end came off and screw mess up where the jack don’t work anymore
Worked beautifully for a Replacement for our customer
I haven't had a chance to use them in a camping setup, but they were easy to install and in a couple of trial runs they work great. I was interested in these because they screw up/down from both ends of the jack. I believe this will improve the holding power of the jacks when deployed. My older jacks (which only had 1 screw point) would tend to back off during an extended camp stay.
It only took about five minutes to replace my front leveling jacks with these new bigger jacks. Awsome lift capability and strength.
Ray F.
6/15/2018
Great no problems
These jacks are well built and have the extra height for uneven surfaces we were looking for. I find mounting this type of jack at a 45 degree angle to the frame is more stable than parallel or perpendicular. We used them all year and they are fine. My only comment to the maker is, something about the set-up of the threaded rod and 'nut' makes running them up and down take more force than should be needed, even before the base hits the ground and they pick up the weight of the trailer. They were that way out of the box. I use a battery-powered impact driver with a 3/4 socket to extend and retract, so no problem for me, but someone using the little hand crank supplied would build some muscles cranking them up and down by hand. I would purchase again if I needed replacements.
These are a great inexpensive method to have leveling And stability system on your trailer. Easy to install and works great.
Randy B.
8/24/2021
A year later and about six RV trips the jacks are still working great. Its not the same as having auto leveling hydraulic jacks like you see on big rigs. But for your 30 or less bumper tow these are very functional.
Very Poor quality. One of the jacks broke the second time I used them. The nut on the end of the screw that raises the jack broke free. I was only lifting one corner of a horse traier (no horses in the trailer).
The Trailer leveling blocks work fine, just as advertised.
Good price well made only problem is keeper pin wears out after a few years wish they would reengineer it.
Tim D.
2/11/2018
Everything is still working great, thanks for the great products, and great service you provide!
Very low quality. There reverse thread. And when you extend them the threaded rod ends up sticking out the hex side.
An excellent quality scissors jack. I went with a 30 inch vice the 24 due to needing the extra lift in unlevel ground. They protrude about 4 inches on the sides but does what I wanted. I will replace the front ones sometime next spring using the 30 inch jacks also.
After a year, I found these jacks to be well made and functional. I camp in some unstable areas with a few Highs and Lows. The extra reach of these jacks is well worth the price. Of course, I have to maintain the screws with a little grease once a year. I fully recommend these jacks!
Not too impressed with the jack. It's built quite a bit lighter than I thought it would be. The side to side play (perpendicular to the "long" direction of the jack) is huge. With a bit of a lever arm the play is unacceptable. On top of that, on both jacks the center screw is far from being true. Both have a highly noticeable wobble. The nuts on the screw also came loose on both jacks after some usage.
The upside to this jack is you do get the 30 inches of stroke, though as flimsy as these things are built I'd be wary to test the 6500lb rated capacity.
Purchased and received within four business days. I installed them on my 2015 Jayco fbds fifthwheel as an upgrade. I had to drill 2 new bolt holes on each side in order to secure each jack with 4 bolts. The Jacks I replaced were 24 inch, so these Jacks extend an inch or so when raised but not any further than the fender flares. Overall a quality product and easy to install.
I use these amidship to help the front and rear jacks. They add to the overall stability of our Sandstorm 5th wheel.
Installed these on the rear of a nine month old 44 foot toy hauler. Why you ask? Well, I got tired of the error and fault codes associated with the electric leveling system.
These jacks are heavy duty and I like the 30 inch option since this will leave plenty of jack unopened and I suspect will deliver a steadier support.
Mounted in about thirty minutes and looks/works great.
Electronics are good when operates properly and without error, but there is something to be said about the old manual way.
Highly recommend.
Great product. Well built. Easy install. We have one touch automatic leveling system on our Grand Design 240RL fifth wheel. But still had movement inside the trailer. These scissor jacks did the trick. Very solid now.
I added these jacks at the mid span of my camper (right at the axles). It made a huge difference in the stability of the parked camper. The prep uncles holes in the mounting plate made the install simple!
I am more than happy with the scissor jacks, very high quality and easy of shopping of the web site is great.
The one time I had a problem ETrailer was very cool about it and quickly credited my card as soon as the product was returned.. The other things I ordered were much cheeper then any other site I researched .. I give ETrailer two thumbs up and will order from them again...
Duffy S
These stabilizers were a replacement for two on my toyhauler and have longer reach and are made stronger than the one's i replaced.
I thought they were well worth the money. My only issue was I had to mount them perpendicular to the frame. I was hoping they could have been mounted on the frame work of the tongue. Since I had to mount them were I did they stick farther than I like, but they work great.
Great jacks and very durable and easy to install. Must take into consideration the extra inch on each side once they are up and if you are using them on a trailer. They may stick out too much, therefore they will require special installation and even make necessary adaptations for attachment.
Installed easily and they function as designed as well. They look cleaner than the factory stabilizers as well. I also like that they use a 3/4" socket to go adjust and not a special tool like other brands.
Recieved my new jacks a couple weeks ago. Install was a breeze. I am very happy with the operation and quality of these jacks.
Haven't installed them yet, but they look like they will do the job quite nicely... Great service & a quality product! Will do business with etrailer.com again I'm sure! Would recomend to friends for sure!
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thomas W.
4/4/2021
Excellent. I believe they are stronger than the OEMs and have a higher lift height.